Kraft vs Matte vs Foil Pouch Materials
Most buyers choose packaging by how it looks in a photo, then discover six months later that the product faded, went soft, or turned rancid on the shelf. Kraft, matte and foil pouches can look almost identical in a mock-up and behave completely differently in a warehouse.
Here is what each material actually is, what it protects against, and where it stops making sense.
What the three materials are
Kraft is paper with a thin film lining bonded inside. The paper gives the natural, unbleached look; the lining is what makes it heat-sealable and stops grease passing through. Unlaminated kraft has no film layer at all — it breathes, which is good for dry bakery and bad for coffee.
Matte is a plastic film (usually BOPP) with a matte lacquer on the outside and a metallised layer inside. The matte finish removes reflections, so print reads cleanly under shop lighting; the metallised layer does the actual protecting.
Foil replaces the metallised layer with aluminium. It is the heaviest barrier of the three, fully opaque, and stiff enough that the bag holds its shape.
Comparison
| Property | Kraft (laminated) | Matte (metallised) | Foil (aluminium) |
|---|---|---|---|
| Light blocking | Good (except the window) | Very good | Complete |
| Moisture barrier | Moderate | Good | Best |
| Oxygen barrier | Moderate | Good | Best |
| Grease resistance | Good when laminated | Good | Good |
| Print quality | Warm, slightly absorbent | Sharp, soft-touch | Sharp, but needs white underprint |
| Relative cost | Low to mid | Mid | Highest |
| Best for | Coffee, tea, dry bakery, soap | Premium coffee, snacks, supplements | Long shelf life, export, sensitive powders |
When kraft is the right answer
Kraft sells a story: natural, unbleached, small-batch. For a roaster selling within a few weeks, or a bakery packing cookies and tea cakes, laminated kraft at 10×20+6 cm or 14×24+6 cm is enough and looks better than gloss. For sliced toast and loaves the toast bread bag with tin tie comes in kraft, cotton-paper or printed stock, from 13×28+5.5 cm up to 22×28+5.5 cm. The trade-off is the window: a cut-out shows the product but also lets light in, so keep windowed kraft away from coffee and anything with fats that go rancid. If you want a window without breaking up the front panel, the side-window eight-seal bag puts the clear film on the gusset instead of the face.
One practical detail: unlaminated kraft cannot hold a heat seal as reliably as laminated stock and will wick oil from greasy snacks. If the product has fat in it, laminate.
When matte earns its price
Matte is the default for premium retail because it photographs well and hides fingerprints. The metallised layer inside is what gives you a real barrier; the matte lacquer is only cosmetic. If a supplier quotes “matte bag” with no metallised layer, you are paying for the look and getting clear-film protection.
This is the material to choose when you want dark, saturated print (soft-touch black, deep green, navy) without the mirror finish of foil. Plain stock starts with the frosted matte stand-up pouch; if you need a printed bag below the 500-pc custom minimum, the UV matte food bag is already printed in eight colours. For a pack that has to be filled fast by hand, the wide-mouth matte eight-seal bag opens across its full width. The same matte film comes on a flat-bottom zipper body — the matte flat-bottom zipper bag runs from 8×12 cm to 20×30 cm — and on a laser-effect film as the holographic flat-bottom bag, 6×10 cm to 34×45 cm.
When foil is not overkill
Foil costs more per bag, and for a product that sells in eight weeks it is usually wasted money. It stops being overkill when the product crosses an ocean, sits in a warehouse, or is genuinely sensitive: matcha, powdered supplements, freeze-dried fruit, pet food with fats. The same logic applies to tea sold in 500 g bags that stay open for months — the pure aluminium stand-up pouch is the simplest foil format we stock, and the foil eight-seal bag is the box-shaped version.
What about clear?
Clear film is the cheapest way to show the product and the worst choice for anything light-sensitive. It works for candy, hardware, soap and samples. The clear stand-up zipper bag and the flat clear zipper bag are the two stock formats most buyers start with. It does not work for coffee, tea, nuts or anything that fades under UV. Clear bags are also unprinted stock, so budget for a label or a printed header card.
Printing notes that change the choice
- Kraft absorbs ink, so colours print slightly muted and dark solids can look mottled. Design with that in mind rather than asking for a pure white background.
- Matte holds fine detail and gradients well; spot colours stay accurate.
- Foil needs a white underprint behind any light colour, otherwise the metal shows through and the print shifts tone.
- Any window adds a die-cut step and can slow production — confirm it is possible at your size before designing around it.
Test with the real product
Order one unprinted 50-pc pack in each candidate material, fill and seal them, and keep them at room temperature for two weeks. Check for oil marks, softening, colour fade and seal failure. That test costs a few dollars and answers the question better than any specification sheet.
Where to start
- Kraft paper bags — window and plain, laminated and unlaminated, from 9×14+6 cm
- Matte & foil bags — soft-touch, pure aluminium, holographic and gold-lined, from 6×8 cm
- Transparent bags — zipper, stand-up and eight-side-seal
- Stand-up zipper bags — five finishes in the same size range
If you tell us the product, the fill weight and how long it sits before it is sold, we can narrow it to one or two materials instead of ten.
Keep reading: Coffee bag sizes maps fill weight to bag dimensions, from 125 g to 1 kg. More reference pages are collected under buying guides.