🏭 Factory Price (EXW) · Freight quoted on inquiry [email protected]  |  WhatsApp/WeChat: +8613580510812

Coffee Bag Sizes: 125g, 250g, 500g and 1kg

If you fill coffee by hand or on a small line, the bag size decides three things at once: how the pack looks on shelf, how much headspace you have above the beans, and whether the zipper closes cleanly after the first open. Order the wrong size and you either fight the fill every day or ship a bag that looks half empty.

These are the dimensions we actually stock, what they hold in practice, and how to test one before committing to a printed run.

Size chart: fill weight to bag dimensions

Fill weight Typical size (W×H+gusset) Style Notes
100 g 15×(14.5+18)+7 cm Diamond-facet Short and wide, stands square
125 g 9×18+5 cm Eight-side-seal, side zipper The most common 125 g format
125 g 13.5×14.5+8 cm Cube Flat-square look, sold in 1000-pcs cases
250 g 13×20+7.5 cm Eight-side-seal, side zipper Standard 250 g retail bag
250 g 13×21+8 cm Stand-up, valve Valve on the front panel
500 g 15×22+8 cm / 16×24+8 cm Stand-up or eight-side-seal Check zipper height against fill line
1 kg 10×34+6 cm Gusseted (side gusset) 13.5×41+7 cm for 1.5 kg; tall, low shelf footprint
Single serve 10×12.5 cm Hang-hole drip bag Fits standard pour-over hangers

Why headspace matters more than the weight

Ground coffee is not a liquid: it settles, and whole beans trap air. A bag filled to the top will not close flat, and a zipper pressed into the fill line will leak. As a working rule, fill to about 75–80% of the bag height and leave 3–4 cm above the fill line for the zipper and the top seal.

That is also why two bags can hold the same weight at different dimensions. A 250 g fill sits comfortably in 13×20+7.5 cm with a 7.5 cm bottom gusset, but the same 250 g in a 13.5×14.5+8 cm cube needs a wider base and a shorter height. Pick the shape you want on shelf first, then confirm the weight with a sample.

Valve, zipper, or neither

One-way valve. Freshly roasted beans release CO₂ for several days. A valve lets that gas out and stops oxygen coming back in, so the bag does not balloon and the coffee does not go flat. If you roast and pack within a few days, you need a valve. If you buy pre-degassed stock, you can skip it.

Zipper. A press-to-close zipper is what makes a bag reusable at home. It adds cost and 1–2 cm of height, and it needs a clean fill line. For 125–250 g retail packs it is close to standard; for 1 kg food-service bags a fold-over or tin-tie is often enough.

Neither. Fold-over bags with a tin tie are cheaper and pack faster by hand. They suit bakery, gift and sample packs more than daily retail coffee.

Barrier: what actually protects the coffee

A metallised or aluminium layer blocks light and moisture; the thicker the foil, the longer the shelf life. Kraft paper with a lining looks warmer but has a lower barrier than a full foil structure. If your coffee sells within 8–12 weeks, a standard metallised eight-side-seal bag is enough. If it sits in a warehouse or crosses an ocean, go up to a foil structure.

Test one size before you print 500

The cheapest way to avoid a wrong-size print run: buy a 50-pc unprinted pack in two candidate sizes, fill both with your actual product, seal them, and leave them on a shelf for a week. You will see immediately which one stands, which one bulges, and where the valve sits relative to the bean line. Only then commit to custom printing at MOQ 500 pcs.

Sizes we stock

The coffee bag range covers all of the formats above in unprinted stock, from 50-pc packs:

If you are not sure which format fits your roast, send the fill weight and the shelf dimensions you are targeting — we will match it against what is already in stock before you order.

Keep reading: Kraft vs matte vs foil pouches compares the three materials side by side. More reference pages are collected under buying guides.